T-Probe-10 ft- 1 - Temperature Sensor with 10 foot cable Thermochron iButtons

T-Probe-10 ft- 1 - Temperature Sensor with 10 foot cable Thermochron iButtonsThis 10 ft temperature sensor cable works with all Link and LinkHub interfaces, as well as with AEM systems. The RJ 45 connector comes standard, but it can be removed and replaced with a different connection if needed. The T Probe can also be hard wired into the bus. The weight, power, RFI, etc. of the cable will determine the 1 Wire bus criteria. The lower third of the sensing unit itself is enclosed by our low pressure molding machine, using OM633

more information on this product can be found on the DS9092+ data sheet

Three press blocks milled to fit an iButton® on both ends of the blocks

readings below 1 amp and above 20 amps will not be specified

will determine the maximum length of the cable

For applications that require read/write capabilities

and the alarms from the iButton® can be read that way

word-break: normal

The T-String will report the sensor closest to the RJ-45 connector first

ExactLog™ Software

Join countless satisfied customers in optimizing your iButton deployment process

the RJ-45 port has been completely removed

For more information on the product